产品中心 Product Center
美孚齿轮润滑剂™ OGL
您的位置: 首页->齿轮油

美孚齿轮润滑剂™ OGL 详细介绍

4.jpg


瓶身瓶盖颜色仅作参考,请以实物为准。

1、2015年第四季度起美孚将逐步推出添加新防伪标识的新包装产品,同时市场上仍将持续销售旧包装产品直至售罄。

2、以上仅针对埃克森美孚(太仓)石油有限公司或埃克森美孚(天津)石油有限公司生产或灌装,或埃克森美孚化工商务有限公司销售的产品。

3、如需了解更多埃克森美孚润滑油信息,请致电我司技术热线:0755-23446090


Mobilgear OGL 007, 009 and 461

Grease

Product Description

Mobilgear OGL 007, 009 and 461 are high performance advanced technology lubricants which incorporate both extreme pressure additives and finely dispersed graphite for load carrying.  They are intended primarily for the lubrication of large, slow to medium speed, heavily loaded gears.  In addition to providing outstanding load carrying, they are formulated to have excellent adhesion and resistance to "fling-off" under extreme conditions.Mobilgear OGL 007, 009 and 461 are easily pumped from drums to application spray nozzles with conventional transfer pumps.The soft consistency and the low temperature properties of Mobilgear OGL 007, 009 and 461 are suited to spray applications operating under a wide variety of conditions. Mobilgear OGL 007, 009 and 461 are formulated with a carefully specified quality of finely dispersed graphite which contributes significantly to wear prevention under the boundary lubrication conditions found in the high load / slow speed operations typical of large open gearing.

Features and Benefits

Mobilgear OGL 007, 009 and 461 are leading members of the Mobilgear brand of products that enjoy a worldwide reputation for performance and innovation.  Developed by ExxonMobil research scientists and backed by a worldwide technical support staff, Mobilgear OGL 007, 009 and 461 have provided excellent protection and performance in large open gearing in a wide variety of industrial applications.Mobilgear OGL 007, 009 and 461 were developed to meet the requirements of Original Equipment Manufacturers (OEMs) and the needs of customers who prefer to use a soft to semi-fluid grease for heavily loaded, slow to medium speed open gearing.  A critical need for products of this type is to separate the heavily loaded gear teeth and avoid surface wear and damage.  Mobilgear OGL 007, 009 and 461 are formulated with a specific quality of finely dispersed graphite which has been shown by our researchers to contribute significantly to the elastohydrodynamic (EHL) film thickness under the high load / slow speed conditions typical of large open gearing.

FeaturesAdvantages and Potential Benefits
Special formulation provides outstanding load-carrying and anti-wear propertiesSuperior protection against wear and reduced gear replacement costs
Excellent pumpability and sprayability for the semi-fluid NLGI 00 gradesEfficient operation, good low temperature start-up and reduced energy consumption
Very good protection against rust and corrosionLonger equipment life, reduced downtime and reduced maintenance costs
Very good adhesive nature of the productReduced fling-off, consumption and lower lubricant costs
Absence of lead, nitrite and solventReduced impact on the environment


Applications

Mobilgear OGL 007, 009 and 461 are designed for the lubrication of large, slow to medium speed, heavily loaded gears in heavy-duty  applications.Mobilgear OGL 007 and 009 are conveniently applied by spray on gear teeth.Mobilgear OGL 461 is also suitable to prime the surfaces of newly assembled open gears in order to provide lubrication during initial turning.The Mobilgear OGL Series is used in a wide variety of industrial sectors including

  • Mining industries, including those that operate at high temperatures, for example, ring gears on cement kilns and ball mills

  • Steel, cement, paper and chemical applications


Typical Properties


 Mobilgear OGL007009461
NLGI Grade00 - 000 - 01.5
Colour, VisualBlackBlackBlack
Penetration, Worked, 25°C, ASTM D 217, mm/10405405305
Dropping Point, °C, ASTM D 2265200200200
Viscosity of Oil, ASTM D 445


cSt @ 40°C4601500460
FZG Gear Test, DIN 51354, A/2.76/50 Fail Stage12+12+Not Applicable
Wear, mg/kWh0.250.25Not Applicable
4-Ball Wear, ASTM D 2266, Scar, mm0.50.50.6
4-Ball Weld Test, ASTM D 2596, weld load, kg800800800
Corrosion Protection, ASTM D 1743PassPassPass



Health and Safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed.  MSDS's are available upon request through your sales contact office, or via the Internet.  This product should not be used for purposes other than its intended use.  If disposing of used product, take care to protect the environment.


相关产品
美孚齿轮油XMP系列
美孚齿轮油XMP系列
美孚事必达EP系列
美孚事必达EP系列
美孚 Dynagear ™ 系列
美孚 Dynagear ™ 系列
美孚威格力™ 500系列
美孚威格力™ 500系列



友情链接:美孚润滑油官网 美孚授权经销商 
版权所有:深圳市粤深孚润滑油有限公司 地址:深圳市龙华新区大浪街道宝龙大厦C栋802# 电话:400-8856-220 联系人:何先生 手机:18926770682 
美孚1号 美孚黑霸王 美孚工业润滑油